Generator set data sheet
BIM Object
- Engine Specifications 1.500 r.p.m.
- Rated Engine Output: 135,9kW prp ; 150,2kW standby
- Manufacturer: FPT_IVECO
- Model: NEF67TM3A
- Engine Type: 4-stroke diesel
- Injection Type: Direct
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 6-L
- Bore and Stroke: 104 x 132 mm
- Displacement: 6,7 L
- Cooling System: Liquid (water + 50% glycol)
- Lube Oil Specifications: ACEA E3 - E5
- Compression Ratio: 17,5 : 1
- Fuel Consumption ESP: 39 l/h
- Fuel Consumption 100% PRP: 36 l/h
- Fuel Consumption 80 % PRP: 29 l/h
- Fuel Consumption 50 % PRP: 18 l/h
- Lube oil consumption with full load: 0,5 % of fuel consumption
- Total oil capacity including tubes, filters 17,2 L
- Total coolant capacity: 25,5 L
- Governor Type Mechanical
- Air Filter Type Dry
- Inner diameter exhaust pipe: 70 mm
- Diesel engine
- 4-stroke cycle
- Water-cooled
- 12V electrical system
- Water separator filter (no visible level)
- Dry air filter
- Radiator with pusher fan
- Mechanical governor
- Hot parts protection
- Moving parts protection
- Radiator water level sensor (Optional)
- HTW sender (Optional)
- LOP sender (Optional)
- Generator: MECC ALTE
- Model: ECP34.2L4C
- Poles: 4
- Connection type (standard): Star-series
- Mounting type: S-3 11"1/2
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
- - SOUNDPROOFED VERSION.
- Steel chassis
- Anti-vibration shock absorbers
- Fuel tank
- Fuel level gauge
- External emergency stop switch
- Bodywork made from high quality steel plate
- High mechanical strength
- Low noise emissions level
- Soundproofing provided by high-density volcanic rock wool
- Epoxy polyester powder coating
- Full access for maintenance (water, oil and filters, no need to remove the canopy)
- Reinforced lifting hooks for crane hoisting
- Watertight chassis (acts as a double barrier against liquid retention)
- Fuel tank drain plug
- Chassis drain plug
- Chassis ready for future mobile kit installation
- Steel residential silencer -35db(A) attenuation.
- Oil sump extraction kit
- Versatility to assemble a high capacity chassis with a metallic fuel tank
- IP Protection according to ISO 8528-13:2016
- 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional)
- Fuel transfer pump (Optional)
- - ELECTRICAL SYSTEM.
- Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
- Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
- Battery charger (standard on gensets with automatic control panels)
- Heating resistor (standard on sets with automatic control panels)
- Battery charger alternator with ground connection
- Starter battery/ies installed (cables and bracket included)
- Ground connection electrical installation with connection ready for ground spike (not supplied)
- Battery Switch (Optional)
- - EXHAUST SYSTEM.
- Maximum exhaust temperature: 570 ºC
- Exhaust Gas Flow: 0,205 kg/s
- Maximum allowed back pressure: 5 kPa
- Exhaust Flange Size (external diameter): 120 mm
- Heat dissipated by exhaust pipe: 688,9 KCal/Kwh
- - NECESSARY AMOUNT OF AIR.
- Intake air flow: 586 m3/h
- Cooling Air Flow: 3,8 m3/s
- Alternator fan air flow: 0,487 m3/s
- - STARTING SYSTEM.
- Starting power: 3 kW
- Starting power: 4,08 CV
- Recommended battery: 100 Ah
- Auxiliary Voltage: 12 Vdc
- - FUEL SYSTEM
- Fuel Oil Specifications: Diesel
- Fuel Tank: 450 L
- Other fuel tank capacities: 600, 1.100 L
- - DIMENSIONS.
- Length: 3.300 mm
- Height: 1.956 mm
- Width: 1.200 mm
- Maximum shipping volume: 7,75 m3
- Weight with liquids in radiator and sump: 2.210 kg
- Fuel tank capacity: 450 L
- Autonomy: 16 Hours
- Sound pressure level: 68 ± 2,4 dB(A)@7m
Length (A)330129.92
Width (B)12047.24
Height (C)195.677.01
Weight with fluids in radiator and crankcase
2210
4873.05
Length (A)330129.92
Width (B)12047.24
Height (C)195.677.01
Weight with fluids in radiator and crankcase
2300
5071.5
Length (A)330129.92
Width (B)12047.24
Height (C)217.985.79
Weight with fluids in radiator and crankcase
2465
5435.325
