Generator set data sheet
- Engine Specifications 1.500 r.p.m.
- Rated Engine Output: 72,5kW prp ; 79,9kW standby
- Manufacturer: FPT_IVECO
- Model: NEF45SM3
- Engine Type: 4-stroke diesel
- Injection Type: Direct
- Aspiration Type: Turbocharged
- Number of cylinders and arrangement: 4-L
- Bore and Stroke: 104 x 132 mm
- Displacement: 4,5 L
- Cooling System: Liquid (water + 50% glycol)
- Lube Oil Specifications: ACEA E3 - E5
- Compression Ratio: 17,5:1
- Fuel Consumption ESP: 21,2 l/h
- Fuel Consumption 100% PRP: 19,4 l/h
- Fuel Consumption 80 % PRP: 15,4 l/h
- Fuel Consumption 50 % PRP: 9,6 l/h
- Lube oil consumption with full load: 0,5 % of fuel consumption
- Total oil capacity including tubes, filters 12,8 L
- Total coolant capacity: 18,5 L
- Governor Type Mechanical
- Air Filter Type Dry
- Inner diameter exhaust pipe: 70,3 mm
- Diesel engine
- 4-stroke cycle
- Water-cooled
- 12V electrical system
- Water separator filter (no visible level)
- Dry air filter
- Radiator with pusher fan
- Mechanical governor
- Hot parts protection
- Moving parts protection
- Radiator water level sensor (Optional)
- HTW sender (Optional)
- LOP sender (Optional)
- Generator: STAMFORD
- Model: UCI224F
- Poles: 4
- Connection type (standard): Star-series
- Mounting type: S-3 11"1/2
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
- - SOUNDPROOFED VERSION.
- Steel chassis
- Anti-vibration shock absorbers
- Fuel tank
- Fuel level gauge
- External emergency stop switch
- Bodywork made from high quality steel plate
- High mechanical strength
- Low noise emissions level
- Soundproofing provided by high-density volcanic rock wool
- Epoxy polyester powder coating
- Full access for maintenance (water, oil and filters, no need to remove the canopy)
- Reinforced lifting hooks for crane hoisting
- Watertight chassis (acts as a double barrier against liquid retention)
- Fuel tank drain plug
- Chassis drain plug
- Chassis ready for future mobile kit installation
- Steel residential silencer -35db(A) attenuation.
- Oil sump extraction kit
- Versatility to assemble a high capacity chassis with a metallic fuel tank
- IP Protection according to ISO 8528-13:2016
- 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional)
- Fuel transfer pump (Optional)
- - ELECTRICAL SYSTEM.
- Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
- Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
- Battery charger (standard on gensets with automatic control panels)
- Heating resistor (standard on sets with automatic control panels)
- Battery charger alternator with ground connection
- Starter battery/ies installed (cables and bracket included)
- Ground connection electrical installation with connection ready for ground spike (not supplied)
- Battery Switch (Optional)
- - EXHAUST SYSTEM.
- Maximum exhaust temperature: 516 ºC
- Maximum allowed back pressure: 6,5 kPa
- Exhaust Flange Size (external diameter): 90 mm
- Heat dissipated by exhaust pipe: 543 KCal/Kwh
- - NECESSARY AMOUNT OF AIR.
- Intake air flow: 273 m3/h
- Cooling Air Flow: 2,2 m3/s
- Alternator fan air flow: 0,216 m3/s
- - STARTING SYSTEM.
- Starting power: 3 kW
- Starting power: 4,08 CV
- Recommended battery: 100 Ah
- Auxiliary Voltage: 12 Vdc
- - FUEL SYSTEM
- Fuel Oil Specifications: Diesel
- Fuel Tank: 240 L
- - DIMENSIONS.
- Length: 3.847 mm
- Height: 2.073 mm
- Width: 1.770 mm
- Weight with liquids in radiator and sump: 1.816 kg
- Fuel tank capacity: 240 L
- Autonomy: 16 Hours
- Sound pressure level: 69 ± 2,4 dB(A)@7m
Length (A)384.7151.46
Width (B)17769.69
Height (C)207.381.61
Weight with fluids in radiator and crankcase
0
0
